IDS GeoRadar Srl SRS-FW400 用户手册
IDS Ingegneria Dei Sistemi S.p.A.
Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
72
/
76
APPENDIX D -
USING CAMERA WITH THE SRS SYSTEM
The SRS sy stem with Lumenera camera op tion, p rovided by IDS, has to be used
as followin g:
as followin g:
S tep 1 Install the drivers of the camera in the acquisition PC laun chin g the
dedicated CD-ROM for Lumenera camer a, LM 135C model, having a
resolution of 800x600 p ixels (see Fig. D. 1) p ressing in sequence
Next/Continue Anyway buttons. As y ou finish with success the installation,
reboot the PC. To install correctly the drivers, user has to be connected as
Sy stem Administrator.
resolution of 800x600 p ixels (see Fig. D. 1) p ressing in sequence
Next/Continue Anyway buttons. As y ou finish with success the installation,
reboot the PC. To install correctly the drivers, user has to be connected as
Sy stem Administrator.
Fig. D. 1 – Videocamera “Lumenera LM135C”
S tep 2 Connect the camera to the PC through USB p ort and activate it. After
launchin g the SW SRS_PLU S, y ou will see the icon besides the sp ies in
the op ening window, as shown in p icture on the label of the manual (see
icon here b elow).
the op ening window, as shown in p icture on the label of the manual (see
icon here b elow).
S tep 3 Select External device settings after having clicked on the SR S software
icon at the top left of the main window (see Fig. D. 2 and Fig. D. 3).