Arris TG1672 用户手册

Conﬁguring Your Wireless Connection

The TG1672 ships with wireless LAN security set by default. See the security label

on your product (shown on image at the left) for the factory security settings: net-

work name (SSID), encryption method, network key, and WPS PIN.

Note:

You must set up your computer and other client devices to work

with the security settings on the TG1672. Refer to the documen-

tation for your client device for instructions on setting security.

On most computer systems you only need to select the network

name (SSID) device and enter the encryption key. If your com-

puter or client device supports WiFi Alliance WPS (Wireless Pro-

tected Setup), activate WPS on your computer or client device

and the TG1672 simultaneously to easily set up your system se-

curity.

If you need to modify the Telephony Gateway’s default wireless security settings,

or if you want to conﬁgure any other wireless LAN settings, refer to the following

instructions.

Accessing the Conﬁguration Interface

up the TG1672 as described in

1 a) If security has been properly set up on your computer to access the wire-

less LAN on the TG1672, use the connection utility for your operating sys-

tem to connect to the wireless LAN using its network name (SSID), as shown

on the security label.
b) If you cannot access the wireless LAN, you must ﬁrst establish a wired

Ethernet connection between your computer and the TG1672.

2 In your web browser, open the page http://192.168.0.1/ to access the

wireless router setup.
The Login screen displays.
Note: The default user name is “admin”. The default password is “pass-

word”, in lower case letters.

3 Enter the user name and password and click the Apply button to log in.

The System Basic Setup screen displays.

Touchstone TG1672 Telephony Gateway User’s Guide

Security

Label