Mitel Deutschland GmbH 68635RFP36U-01 用户手册
SIP-DECT OM System Manual
92
The
DECT phone enrolment page opens.
2 Select your configuration file and press the Import button. For information on the file layout see
section 9.4.1.
3 A parsing protocol can be read, if you press the referring Log file button. All successfully imported
data records are presented in a list:
4 Select the DECT phones you want to add to the OMM database by selecting the appropriate
checkboxes, and click
Add.
All successfully stored records are marked green in the
Added column.
Failed records are marked with a red star.
5 To read error hints in the referring log file, press the Log file button. Error hints can also be read in a
syslog trace.
6 To remove imported data entries, activate the check box next to the desired entries. Press Delete to
remove the selected entries.
5.7.3 SUBSCRIBING DECT PHONES
Preparation by OMM Web service
After adding a DECT phone configuration to the OMM, the DECT phone must be subscribed. The OMM
must first be enabled to allow subscriptions from DECT phones. This is done by pressing the following
buttons on the
After adding a DECT phone configuration to the OMM, the DECT phone must be subscribed. The OMM
must first be enabled to allow subscriptions from DECT phones. This is done by pressing the following
buttons on the
DECT Phones page.
•
Start button under the “Subscription with configured IPEI” caption (see section 5.7.3.1). This button
enables subscription for the next 24 hours.
•
Start button and time interval parameter under the “Wildcard subscription” caption. This button
enables wildcard subscription for the selected time. After expiry the “subscription with configured
IPEIs” is still enabled for 24 hours.
IPEIs” is still enabled for 24 hours.
Note: To ease the first installation of a DECT system, the subscription
is enabled permanently while at least one DECT phone (with
IPEI) is set up in the database and no DECT phone is
subscribed. After successful subscription of the first DECT phone
the subscription will still be enabled for 24 hours.
IPEI) is set up in the database and no DECT phone is
subscribed. After successful subscription of the first DECT phone
the subscription will still be enabled for 24 hours.
Subscription steps, done by DECT phone
After the DECT phone configuration is complete on the OMM and the OMM is allowing new
subscriptions, each DECT phone must subscribe to the system.
After the DECT phone configuration is complete on the OMM and the OMM is allowing new
subscriptions, each DECT phone must subscribe to the system.