Konica Minolta A09N2 用户手册
E-3
(6) Remove the cable from the control panel assem-
bly.
(7)
<When the Local Interface Kit EK-608 is not
mounted to the main body>
<When the Local Interface Kit EK-608 is not
mounted to the main body>
a) Remove the bracket shown in the illustration.
(Two screws)
Note:
Discard one of the two removed screws.
b) Remove the bracket from the USB cable.
(Two screws)
Note:
Discard the removed bracket and screws.
<When the Local Interface Kit EK-608 is mounted to
the main body>
the main body>
Disconnect the connector and remove the local
interface board unit. (Three screws)
interface board unit. (Three screws)
(8) Remove the control panel left cover. (One screw)
(9) Remove the plate spring. (One screw)