Gorenje NRK2000P2B 用户手册
Fault:
Cause/Remedy
Diffi cult door opening:
• If you want to open the immediately closed door, you
may experience trouble in doing so. This happens
because certain quantity of cold air escapes from
the appliance through the open door and is replaced
by warm ambient air. Cooling of such air creates
negative pressure (vacuum) and suction, which
prevents easy opening of the door. Situation is
normalized after a few minutes (1-3), and you can
open the door with ease.
because certain quantity of cold air escapes from
the appliance through the open door and is replaced
by warm ambient air. Cooling of such air creates
negative pressure (vacuum) and suction, which
prevents easy opening of the door. Situation is
normalized after a few minutes (1-3), and you can
open the door with ease.
Bulb replacement:
• Before replacing the light bulb, disconnect the
appliance form the power supply. Using the
screwdriver remove the cover, replace the bulb with a
new one (E14, same voltage as the factory one) and
fi t back the cover.
screwdriver remove the cover, replace the bulb with a
new one (E14, same voltage as the factory one) and
fi t back the cover.
• Don’t forget: the old bulb does not belong to organic
waste.
• Light bulb is consumption material and is not covered
by the warranty.
Error code displayed:
• If the character E1 appears on the digital display call
service assistance.
Troubleshooting helpful hints:
• If you are not able to fi x the trouble by any of the
above tips, disconnect the power cord from the mains
outlet, wait 10 minutes, and reconnect the appliance.
outlet, wait 10 minutes, and reconnect the appliance.
In case trouble persists, contact the nearest
authorized service center, giving them the type,
model and serial number of the appliance, written on
the rating plate in the inside of the appliance.
model and serial number of the appliance, written on
the rating plate in the inside of the appliance.
133624
29