Advanced Card Systems Limited AET62 用户手册
AET62 Design Specification
Version 1.0
Version 1.0
8-DEC-09
Page 15 of 18
AET62
Remark:
In general, the Pseudo APDUs “Direct Transmit” and “Get Response” are used in pairs. Once the
APDU “Direct Transmit” is sent, the reader will return the length of the response data. Then, the
APDU “Get Response” is immediately used to retrieve the actual response data.
APDU “Direct Transmit” is sent, the reader will return the length of the response data. Then, the
APDU “Get Response” is immediately used to retrieve the actual response data.
6.5. Bi-Color LED and Buzzer Control
This APDU is used to control the states of the Bi-Color LED and Buzzer.
Table 3.0A: Bi-Color LED and Buzzer Control Command Format (9 Bytes)
Command
Class
INS
P1
P2
Lc
Data In
(4 Bytes)
Bi-Color and
Buzzer
LED Control
0xFF
0x00
0x40
LED
State
Control
0x04
Blinking Duration Control
P2: LED State Control
Table 3.0B: Bi-Color LED and Buzzer Control Format (1 Byte)
CMD
Item
Description
Bit 0
Final Red LED State
1 = On; 0 = Off
Bit 1
Final Green LED State
1 = On; 0 = Off
Bit 2
Red LED State Mask
1 = Update the State
0 = No change
Bit 3
Green LED State Mask
1 = Update the State
0 = No change
Bit 4
Initial Red LED Blinking State
1 = On; 0 = Off
Bit 5
Initial Green LED Blinking State
1 = On; 0 = Off
Bit 6
Red LED Blinking Mask
1 = Blink
0 = Not Blink
Bit 7
Green LED Blinking Mask
1 = Blink
0 = Not Blink