Ophir Optronics Ltd QSR 用户手册

Chapter 2 – Installing StarLab

Connecting the USBI and Pulsar Devices

To connect the USBI or Pulsar device:

1. Connect the head to the head input on the device.

• If you are working with the USBI device, you must connect a

thermopile, photodiode, PD10, or pyroelectric head to the head input
point on the device.

Figure 2-3 USBI Box, Head Connector Side

• If you are working with the Pulsar device, you can connect up to four

heads to any one of the four head input points on the device.

Figure 2-4 Pulsar Box, Head Connector Side

2. If you are using the Pulsar device, connect the 12v power cable to the

main line and to the 12VDC input on the device. The POWER/LINK LED
lights.

3. Connect the USB cable to the device and to the USB port of your PC. On

the USBI, the LINK LED flickers momentarily, indicating USB
enumeration of the device.

StarLab User Guide