Arcadian Networks Inc. AE11OW 用户手册
- 16 -
AE11GOW WMU User’s Guide
3 U
SING THE
M
ODEM
Follow the steps below to use the modem properly.
1. Check that the computer with which you are using the
AE11G OW modem contains a working Ethernet network
card, and has the following software installed and
operational:
card, and has the following software installed and
operational:
a. Microsoft Windows 95 operating system or later
b. A standard Internet browser
application
c. The Telnet/SHH communications
utility
2. Attach your computer to the modem’s LAN port with the
included RJ-45 Ethernet cable.
3. Connect the antenna cable to the LAN connector on the
Left side of the modem.
4. Plug the 12VDC modem power supply jack into the
POWER socket on the Left side of the modem.
Note: As with any household electrical device, avoid the risk of accidental
electrical shock. Make sure that your hands are completely dry and
that there is no moisture on the floor or other surfaces in the immediate
area of the electrical wall outlet.
electrical shock. Make sure that your hands are completely dry and
that there is no moisture on the floor or other surfaces in the immediate
area of the electrical wall outlet.
Hazard: The RF antennas used for this modem must be installed to
provide a separation distance of at least 60 cm from all persons and must
not be
co-located or operated in conjunction with any other antenna or
transmitter.
provide a separation distance of at least 60 cm from all persons and must
not be
co-located or operated in conjunction with any other antenna or
transmitter.