Arcadian Networks Inc. V390I 用户手册
2 Physical and Functional Description
10
V290iA User Guide
The V390i includes the following main components:
V384+A board – A UHF FDD radio modem operating in the 757-788 MHz
frequency range.
frequency range.
Cisco cards – These include the following:
Mobile Access Router Card (MARC) – The routing engine includes the host
processor and memory. It is connected to the V384+A through a Fast Ethernet
interface.
processor and memory. It is connected to the V384+A through a Fast Ethernet
interface.
4-Port Fast Ethernet Switch Mobile Interface Card (FESMIC) – The 4-port
FESMIC provides four sets of Fast Ethernet signals. One of these is internally
connected to the WMIC.
FESMIC provides four sets of Fast Ethernet signals. One of these is internally
connected to the WMIC.
4-Port Serial Mobile Interface Card (SMIC) – The 4-port SMIC provides four
sets of serial signals.
sets of serial signals.
Wireless Mobile Interface Card (WMIC) – The 2.4-GHz WMIC can be
optionally configured as an access point (AP), a root bridge, or a non-root bridge.
The WMIC is connected to a Fast Ethernet port on the FESMIC.
optionally configured as an access point (AP), a root bridge, or a non-root bridge.
The WMIC is connected to a Fast Ethernet port on the FESMIC.
Mobile Router Power Card (MPRC)
Arcadian Networks Power Supply Controller (PSC) card – The PSC provides
power management of the V390i units: the V384+A, the Cisco cards, and the
temperature control system.
power management of the V390i units: the V384+A, the Cisco cards, and the
temperature control system.
Following are top and bottom views of the V390i device:
Figure 3: Arcadian Networks V390i Bottom View
Serial
Interfaces
Router
Console
PSC
Console
Ethernet
Interfaces
48 VDC
Power
Connector
UHF Antenna
Connector