Arcadian Networks Inc. V487I 用户手册
8
V487i WMU User’s Guide
3 U
SING THE
M
ODEM
Follow the steps below to use the modem properly.
To use the modem:
1
Check that the computer with which you are using the
V487i modem contains a working Ethernet network card,
and has the following software installed and operational:
V487i modem contains a working Ethernet network card,
and has the following software installed and operational:
• Microsoft Windows 95 operating system or later
• A standard Internet browser application
• The Telnet communications utility
• A standard Internet browser application
• The Telnet communications utility
2
Attach your computer to the modem’s LAN port with the
included RJ-45 Ethernet cable.
included RJ-45 Ethernet cable.
3
Connect the antenna cable to the CABLE connector on the
rear of the modem.
rear of the modem.
4
Plug the 9.5-29Volt modem power supply jack into the
POWER socket on the rear of the modem.
POWER socket on the rear of the modem.
Note: As with any household electrical device, avoid the risk of accidental
electrical shock. Make sure that your hands are completely dry and that there is
no moisture on the floor or other surfaces in the immediate area of the electrical
wall outlet.
electrical shock. Make sure that your hands are completely dry and that there is
no moisture on the floor or other surfaces in the immediate area of the electrical
wall outlet.
Hazard: Avoid of getting the human body closer than 84 Cm to the antenna.