Dorman Products Inc. DORM03 用户手册
ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
Use this procedure for the following
applications.
Crown Victoria 2005-1998
Grand Marquis 2005-1998
Marauder 2004-2003
applications.
Crown Victoria 2005-1998
Grand Marquis 2005-1998
Marauder 2004-2003
1.
Turn ignition from OFF to RUN 4 times
within 3 seconds, with the 4th time
ending in RUN. Door locks will cycle to
confirm programming mode.
within 3 seconds, with the 4th time
ending in RUN. Door locks will cycle to
confirm programming mode.
2.
Within 20 seconds, press any button on
first keyless remote. Door locks will
cycle to confirm programming.
first keyless remote. Door locks will
cycle to confirm programming.
3.
Within 20 seconds, press any button on
second keyless remote. Door locks will
cycle again to confirm programming.
second keyless remote. Door locks will
cycle again to confirm programming.
4.
Turn ignition to OFF. Locks will again
cycle to indicate end of programming
mode.
cycle to indicate end of programming
mode.
FCC WARNING
Statement 15.19(a)(3):
This
device complies with Part 15
of the FCC Rules. Operation
is subject to the following
two conditions: (1) this
device may not cause
harmful interference, and (2)
this device must accept any
interference received,
including interference that
may cause undesired
operation.
Changes or modifications not
expressly approved by
Dorman Products Inc. could
void the user’s authority to
operate the equipment.
of the FCC Rules. Operation
is subject to the following
two conditions: (1) this
device may not cause
harmful interference, and (2)
this device must accept any
interference received,
including interference that
may cause undesired
operation.
Changes or modifications not
expressly approved by
Dorman Products Inc. could
void the user’s authority to
operate the equipment.
Use this procedure for the following
applications.
Focus 2007-2000
applications.
Focus 2007-2000
1.
Fasten seat belt and close all doors.
2.
Turn ignition from OFF to RUN 4 times
within 6 seconds, with the 4th time
ending in RUN.
within 6 seconds, with the 4th time
ending in RUN.
3.
Turn ignition to OFF. A chime will sound
to confirm programming mode.
to confirm programming mode.
4.
Within 10 seconds, press and hold any
button on the first keyless remote. Wait
for the chime and warning lamp to flash
then release button on remote.
button on the first keyless remote. Wait
for the chime and warning lamp to flash
then release button on remote.
5.
Within 10 seconds, repeat step 4 to
program additional remotes.
program additional remotes.
6.
Turn ignition to RUN of wait 10 seconds
to end programming mode. System will
chime once to confirm programming.
to end programming mode. System will
chime once to confirm programming.
IC WARNING
The term IC before the
Certification/Registration
number only signifies that
the Industry Canada
technical specifications were
met.
Operation is subject to the
following two conditions: (1)
this device may not cause
interference, and (2) this
device must accept any
interference including
interference that may cause
undesired operation of the
device.
Use this procedure for the following
applications.
All other applications not specified.
applications.
All other applications not specified.
1.
Turn ignition from OFF to RUN 8 times
within 10 seconds, with the 8th time
ending in RUN. Door locks will cycle to
confirm programming mode.
within 10 seconds, with the 8th time
ending in RUN. Door locks will cycle to
confirm programming mode.
2.
Within 20 seconds, press any button on
first keyless remote. Door locks will
cycle to confirm programming.
first keyless remote. Door locks will
cycle to confirm programming.
3.
Within 20 seconds, press any button on
second keyless remote. Door locks will
cycle again to confirm programming.
second keyless remote. Door locks will
cycle again to confirm programming.
4.
Turn ignition to OFF. Locks will again
cycle to indicate end of programming
mode.
cycle to indicate end of programming
mode.