TopSeed Technology Corp. TSAQ-901 用户手册

How to use the remote: 
1. Plug the receiver unit into any USB port. 

 

1. Your operation system will start to setup the receiver unit. There is no 

software to load. (Win98/Me may show some dialog boxes during 
setup process. Press “Next” on all dialog boxes and then “finish”. 
During setup process, the O/S may ask you to put Win98 CD into the 
CD- ROM.) 

2. After the setup process finish, the remote will work. 
Notice: 

1-1. If the remote is not working or interference with another: 

ID Change : Press Both “ M “ and “ B ” buttons simultaneously 

more than 3 seconds will change the 

currend ID 

.

 (Green LED flashed)

 

 

                  Pic.1                         Pic.2 
 
1-2. Use a paper clip to press the receiver unit red button (Stand by to 
learn the new ID)---Pic.2 
 
1-3. Press any button except “M “ button to operate. (Let receiver unit 
learn the new ID). 
 
2. If you remove the battery or the remote does not work, repeat the 

steps 1-1 to 1-3. 

1