Wistron Corporation LT1423PWCA 用户手册
This product is unable to enter full screen DOS mode when using the Lenovo
LT1423pwCA
Wide USB
monitor.
Problem show
Problem
Solution(s)
The monitor does not turn on
USB connection using: Check the
connections. Make sure the USB
cable is firmly connected to the
monitor.
Disconnect and reconnect the USB
cable.
Check the condition of the USB
cable. If the cable is frayed or
damaged, replace the cable. If the
connectors are soiled, wipe them
with a clean cloth.
Using through WIFI connection:
Make sure the monitor is no connect
to a USB cable.Connect the AC
adaptor Recharge the monitor for
10 minutes then power up the
monitor.
The screen is blank, although
the power is on
USB connection using: Make sure
the USB cable is properly connected
to the computer.
Make sure the computer is on and
working. The computer may be in
sleep or power-saving mode, or
displaying a blank screen saver.
Move the mouse to "wake up" the
computer.
Using through WIFI connection:
Press power key within 1 second to
wake up the monitor from energy
saving mode.Make sure the computer
is connect to the monitor correctly in
WCP (LT1423pwCA control panel).
Or you need to press connect under
the SSID of the monitor in the WCP
connection management.Reboot the
monitor and connect with
LT1423pwCA control panel.
The picture "bounces" or moves
in a wave-like pattern
Move electrical devices that may
cause electrical interference away
from the monitor.
Minor issues can generally be resolved by:
unplugging and re-plugging the LT1423pwCA monitor or,
Reboot LT1423pwCA monitor and connect again in connect management of LT1423pwCA control panel.
changing the display mode via the DisplayLink GUI, or,
changing the display mode via Windows Display Properties.
On Windows 7 WDDM (Aero and Basic)
DisplayLink software works closely with the graphics card and there may be interoperability issues
with some graphics cards. If this happen:
1. Try to upgrade to the latest graphics drivers.
2. Try to upgrade to latest LT1423pwCA control panel software.
3. Report the issue via your support channel.
4. If necessary, boot into Safe Mode and use Windows' Backup and Restore Center to recover.
4-16
L
T1423pwCA Wide Touch Monitor User’s Guide