RadioFrame Networks Inc DH2 用户手册
RadioFrame System
Equipment Commissioning
RFN_3.1 Beta
87
Status Indicator
Description
Action
Green
Unit Installed and fully
functional
functional
The component has been installed, configured,
and is operating as it should.
and is operating as it should.
Yellow
Unit installed but not
configured
configured
Component has been installed and the System
Manager software is still configuring the
component. When System Manager has finished
startup (10 to 20 minutes), the status will turn to
green, unless there’s a problem with the unit.
Manager software is still configuring the
component. When System Manager has finished
startup (10 to 20 minutes), the status will turn to
green, unless there’s a problem with the unit.
Gray
Unit not installed
Component has not yet been installed.
Red
Alarm condition
The component has returned an alarm condition.
Refer to Section 7 “Operations and Maintenance”
for specific alarm conditions pertaining to the
component.
Refer to Section 7 “Operations and Maintenance”
for specific alarm conditions pertaining to the
component.
5.3.4
Configuring the NCU
The NCU System Configuration page displays the NCU Device Configuration,
including the Device Name, IP Address, and Building Address for the NCU—you
can change this information at any time. This page also displays the External IP
Configuration, the information that systems outside the RFS use to recognize
the RFS, the SNTP Server Configuration, and Other Configuration Options.
including the Device Name, IP Address, and Building Address for the NCU—you
can change this information at any time. This page also displays the External IP
Configuration, the information that systems outside the RFS use to recognize
the RFS, the SNTP Server Configuration, and Other Configuration Options.
1 For Device Name, enter up to 31 alphanumeric characters to uniquely
identify the NCU.
2 The IP Address is assigned during the installation of the RFS. You don’t
need to change the value of this internal address.