RadioFrame Networks Inc MCRB10 用户手册

MC-Series System Installation & Testing 

RadioFrame Networks, Inc.

Connect the RFN-provided power cable (P/N 820-0615-50; CSU to PDU-CSU) to the CSU 
power. 

Connect the other end of the power cable to the circuit breaker on the PDU.  

Connect the CSU to each iSC-3 according to Nextel’s installation procedure. 

For complete cabling information, refer to Appendix C Cabling Diagrams: 3-Sector Configuration. 

Follow Nextel's procedures for mounting the following auxiliary equipment:   

• Powerplant 
• Backboard 
• Surge 

arrestors 

• Alarm 

blocks 

• Environmental 

sensors 

Follow Nextel's procedures for installing the following wiring at the site, and then complete the 
procedures in this section to complete the cabinet-to-site cabling. See the following illustration for 
top of the rack connections. 

• Grounding 
• T1 
• GPS 

surge 

arrestors 

• EAS 

alarm 

cabling 

•  RF (Tx / Rx / Rx diversity) 
• Power