RadioFrame Networks Inc MCSERIES10 用户手册
MC-Series System Installation & Testing
Scheduled and Unscheduled Maintenance
RadioFrame Networks, Inc.
93
9
In System Manager, refresh the RBS Status page until the RadioBlade icon status bar
changes from red (not present) to yellow (present and locked). This will take approximately
three minutes.
changes from red (not present) to yellow (present and locked). This will take approximately
three minutes.
10
Unlock the RadioBlade.
On the RadioBlade Statistics page, the State of the RadioBlade will change from 2 (locked)
to 11 (unlocked).
to 11 (unlocked).
7.8.2
Replacing a Chassis: BIC, AIC, or RBS
1
Power down RFN equipment in the following order using circuit breakers on the PDU:
•
BIC
•
AIC
•
RBS 1 (power down RBS 2 and RBS 3 if they are present)
•
RF shelf 1, 2, and 3
2
Disconnect cabling from the back of the chassis to be replaced (refer to Appendix C: Cabling
Diagrams: 3-Sector Configuration).
Diagrams: 3-Sector Configuration).
For the BIC, disconnect the following cabling from the rear of the BIC only:
Index
Part Number
Disconnect From
To
Type
P_11
820-0614-00
BIC: power
PDU: BIC
power
G_13
820-0609-00
BIC: ground
GND BAR
ground
DAT_4*
111-0565-00
BIC: ERTM PORT 1
BIC: CRTC 10baseT - ISC
UTP
DAT_5
111-0565-00
BIC: ERTM PORT 2
AIC: ERTM PORT 4
UTP
locking arm
locking arm