RadioFrame Networks Inc MCSERIESHP10 用户手册
MC-Series High-Power System
Management—Datafill, Configuration and Optimization
998--01 Rev X1
RadioFrame Networks, Inc.
CONFIDENTIAL AND PROPRIETARY 67
3 The IP Address is assigned during the installation of the MC-Series system, and
doesn’t need to be changed.
4 For Building Address, enter up to 3,000 alphanumeric characters specifying the
location of the component. Enter information such as the street address, mailing
address, building and other site information, as well as the building floor, Telco
closet and cabinet location.
address, building and other site information, as well as the building floor, Telco
closet and cabinet location.
5 Select Save Changes.
Figure 42 System Configuration Page, BIC Selected Component
6.2.2.6 Viewing
Hardware and Software Versions
Select the
Software Version Information link on the System Configuration page. The
Software Version Information page depicts each component in the MC-Series system,
and each board installed in each component. For each board the page lists:
and each board installed in each component. For each board the page lists:
• MAC—the MAC address
• HW—hardware version
• FPGA—Field Programmable Gate Array version (manufacturer defined)
• ROM—software loaded at time of shipment
• SW Selected—currently selected software version, A or B
• SW Loaded—currently loaded software version, A or B
• SW Versions A—Software version loaded in partition A
• SW Versions B—Software version loaded in partition B
• HW—hardware version
• FPGA—Field Programmable Gate Array version (manufacturer defined)
• ROM—software loaded at time of shipment
• SW Selected—currently selected software version, A or B
• SW Loaded—currently loaded software version, A or B
• SW Versions A—Software version loaded in partition A
• SW Versions B—Software version loaded in partition B