RadioFrame Networks Inc RFU7 用户手册
Preparing for the Installation
4
ACU is the interface between the RFUs and the Network Chassis Unit, and
provides power, signals, and timing to the RFUs. The ACU is 7” high x 19” wide
x 13” deep, powered by 120VAC, and rack mounted. All connections are CAT 5
(RJ45) except for power.
provides power, signals, and timing to the RFUs. The ACU is 7” high x 19” wide
x 13” deep, powered by 120VAC, and rack mounted. All connections are CAT 5
(RJ45) except for power.
RadioFrame Unit or RFU
The RadioFrame Unit serves as the access interface between signals received
from mobile terminals, via a standard air interface, and the airlink processing
performed in the ACU. The RFU is approximately 8” high x 13.5” wide x 5” deep
and mounts conveniently on a wall, or on or above the ceiling to serve a coverage
area up to 32,000 square feet (100’ cell radius). The RFU connects to the ACU via
a single CAT 5 connection, receiving its power, signals, and timing from the
ACU. Each RFU holds up to 7 RadioBlades.
from mobile terminals, via a standard air interface, and the airlink processing
performed in the ACU. The RFU is approximately 8” high x 13.5” wide x 5” deep
and mounts conveniently on a wall, or on or above the ceiling to serve a coverage
area up to 32,000 square feet (100’ cell radius). The RFU connects to the ACU via
a single CAT 5 connection, receiving its power, signals, and timing from the
ACU. Each RFU holds up to 7 RadioBlades.
Figure 4
Each RFU holds up to 7 RadioBlades.
RadioBlades
Each RadioBlade provides a single RF channel transceiver supporting one of
several voice and wireless data standards, including GSM, CDMA, iDEN,
802.11b (WLAN), and many others. Each RadioBlade is approximately
4” high x 1/2” wide x 3” deep and inserts into a slot in the RFU. Each RadioBlade
contains an onboard omni antenna and provides a coverage area of
approximately 32,000 square feet (nominal 100’ radius cell).
several voice and wireless data standards, including GSM, CDMA, iDEN,
802.11b (WLAN), and many others. Each RadioBlade is approximately
4” high x 1/2” wide x 3” deep and inserts into a slot in the RFU. Each RadioBlade
contains an onboard omni antenna and provides a coverage area of
approximately 32,000 square feet (nominal 100’ radius cell).