The House of Marley.LLC EMDA001RG 用户手册

下载
页码 6
One Foundation Digital Audio System 
 
Product Name: Bluetooth Speaker 
Model: EM-DA001-RG 
 
 
Welcome to the House of Marley 
We are honored you have selected One Foundation to become part of your music 
experience. The One Foundation is a two-way, stereo sound system which works 
with Bluetooth® devices connected wirelessly and hundreds of other devices via 
the auxiliary, digital, or analog inputs. One Foundation fuses striking aesthetics with 
a powerful audio engine and brings realism and detail to your music collection. 
High-definition, long-throw, wood-fiber impregnated, 5.25-inch woofers in a tuned, 
bass-reflex enclosure, Danish designed 1-inch tweeters and over 200 watts come 
together in this beautifully engineered work of sonic beauty. 
 
Everything You Need 
One Foundation comes with the following items: 
 
Sound System [Ill. 1] 
 
Remote [Ill. 2] 
 
Power Cord for Wall Outlet [Ill. 3] 
 
3.5mm Stereo Cable [Ill. 4] 
 
Powering One Foundation 
Your One Foundation uses a built-in, 100-120 VAC 50/60Hz or 220-240 VAC 
50/60Hz 200W (depending on the country where the product was purchased) 
power supply and is powered by a standard wall outlet. 
1.
 
Insert the AC power cord into One Foundation. [Ill. 5] 
2.
 
Insert wall plug into an appropriate wall outlet. [Ill. 6] 
 
Inputs/Output 
One Foundation uses automatic signal detection and will only access the inputs from 
devices that are plugged into the audio system. One Foundation will automatically 
revert to the last used input when powered “On”. 
[ILLUSTRATION OF REAR INPUT PANEL – Ill. 7] 
-
 
[WHITE CIRCLE] RCA Analog Input: For use with analog sources. 
-
 
Pre-Out: Recommended for use with active subwoofer (not included). See 
Fig. # for using One Foundation with a subwoofer. 
-
 
[RED CIRCLE] Digital Audio (Optical) Input: Recommended for use with 
digital peripherals. Peripheral must be connected and turned on in order to 
cycle to this input. 
-
 
[BLUE CIRCLE] Bluetooth Pairing Button: This mode can also be initiated by 
pressing and holding the [INPUT] button on the remote. 
 [ILLUSTRATION OF SIDE PANEL]