HP Compaq KB-9965 311059-001 用户手册

To remove the front panel LED assembly: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Remove the rack bezel (rack model only). Refer to “Rack Bezel (Rack Model Only)” in 

this chapter. 

4.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

5.  Remove the hot-plug fans. Refer to “Hot-Plug Fans (Processor and I/O)” in this chapter. 

6.  Remove the fan basket. Refer to “Fan Basket” in this chapter. 

7.  Unscrew and move aside the processor fan bracket. It is not necessary to disconnect 

cables or remove this component completely for this procedure. Refer to “Processor Fan 
Bracket” in this chapter. 

8.  Disconnect the front panel LED assembly from the power backplane. 

 

9.  Disconnect the cable from all cable guide clips, and pass it through the cable guide 

opening toward the front of the server.