CDVI WIRELESS S.P.A. TMC1C9V 用户手册
ELPRO INNOTEK SPA VIA PIAVE, 23 - 31020 S.PIETRO DI FELETTO (TV) – ITALY
Tel. +39.0438.450860 R.A. – Fax. +39.0438.455628 - P.I. 03023780269
internet:
www.erone.com
- e-mail: info@erone.com
PRODUCT TECHNICAL SPECIFICATIONS
Product
Brand
Type
File
Rev.
Date
FCC-ID
Encoded Transmitter Module
-
SETMC1C9V IS-TMC1C9V
2
19/1/2015
PWJTMC1C9V
Description
Saw transmitter module with external aerial and internal security code ( Keeloq Hopping code )
Applications
RF Transmissions of digital signal from pure contacts
Technical
specifications
Parameter
Min
Typ
Max
Unit
Band
433,05 – 434,790
MHz
Carrier frequency
-
433,92
-
MHz
Carrier frequency tolerance
100
KHz
E.r.p emitted power
-
-
60.50
dBµV/m
Spurious emissions
-
-
-73
dBm
Modulation
AM / ASK
Baud-rate
-
834
-
Bit/sec
Output load
-
50
-
Power supply
-
+9
-
V
Current consumption
-
-
17
mA
Dimensions ( l x h x p )
45x 28 x 6
mm
Operating temperature
- 20 + 80
°C
Wirings
9V Battery connection + 1 antenna + NO input
200 mm
Input
1
-
Range ( in open space )
1000
m
Input type
Pure contact
Security coding
Keeloq Hopping code
Security code combinations
2
64
Mechanical
specifications
44
2
8
6
Block Diagram
WIRINGS
1 : BLACK = N.O. INPUT CONTACT
2 : BLACK = N.O. INPUT CONTACT
7 : BLUE = ANTENNA
9 : RED = POWER SUPPLY (+ 9Vdc)
8 : BLACK = POWER SUPPLY 0V
2 : BLACK = N.O. INPUT CONTACT
7 : BLUE = ANTENNA
9 : RED = POWER SUPPLY (+ 9Vdc)
8 : BLACK = POWER SUPPLY 0V
FCC Warning
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: this device is intended only for OEM integrators. Integration is strictly restricted under control of the Grantee.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: this device is intended only for OEM integrators. Integration is strictly restricted under control of the Grantee.
NOTES FOR INTEGRATORS
For a host manufacture’s using a certified modular, if (1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is
marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the FCC ID
of the module is visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID:
PWJTMC1C9V” or “Contains FCC ID: PWJTMC1C9V” must be used. The host OEM user manual must also contain clear instructions
on how end users can find and/or access the module and the FCC ID.
marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the FCC ID
of the module is visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID:
PWJTMC1C9V” or “Contains FCC ID: PWJTMC1C9V” must be used. The host OEM user manual must also contain clear instructions
on how end users can find and/or access the module and the FCC ID.