Wilson Electronics LLC 460008 用户手册

ENGLISH

 Green/red  Blinking indicates 

that the booster is operating at a 

reduced gain to prevent oscillation 

(feedback).

Fixing Red Light Issues 
If one or more lights on the Signal Boost 

are red: 
1.  Make sure all connections are tight. 
2.   Increase the distance between the 

outside antenna and the Drive 4G-

M, by moving them horizontally and/

or vertically farther apart until the 

light(s) change to green. Remember 

to keep the antenna at least 6 

inches from any window or sunroof.

3.   Follow the same steps for a green/

red blinking light until the light goes 

solid green.

4.   If more separation is not possible 

and the coverage of the booster is 

too small with a green/red blinking 

light indicating reduced gain, 

contact the weBoost Customer 

Support Team for assistance:  

866-294-1660.

Lights Off 
1.   Check connections on the power 

supply to see that it is firmly plugged 

into both the Drive 4G-M and the 

power source.

2.   If using a DC power supply in your 

vehicle, ensure the power supply is 

properly inserted. Then check the 

12 volt power from the car socket 

and the fuse. Replace the fuse if 

necessary. 

3.   If using a power strip in a building, 

ensure the power strip is plugged 

in and turned on and that power is 

coming from the outlet.

Note:   The Drive 4G-M Signal Booster 

may remain on, in vehicles whose 

12V DC power sources do not 

automatically shutdown when the 

vehicle is turned off. This could 

result in discharging the vehicles 

battery in one to two days. 

Note:   Some 12V DC power sources 

are shut down when the vehicle 

ignition is turned to off. Refer to 

your vehicle owners manual for 

specifics related to your vehicle. 

NOTE: The aluminum casing of 

your Signal Booster will adjust to the 

temperature of its environment, but is 

designed to protect the Signal Booster 

technology. For example, in the summer, 

the Signal Booster case may be as hot 

as 150 degrees inside your vehicle. 

These high temperatures will NOT 

damage the Signal Booster, nor do they 

pose a fire risk to the vehicle. Again, be 

sure to place your Signal Booster in a 

location with adequate ventilation and 

away from direct sunlight or moisture.  

The Signal Boost includes 4 indicator 

lights on the front of the Drive 4G-M. The 

indicator lights will either be green or red.

 Green indicates that the booster is 

powered and operating at maximum 

gain. 

 Solid  Red indicates that the booster 

has shut off on the associated 

frequencies to prevent oscillation 

(feedback).