RFNet Technologies Pte Ltd 000001 用户手册

RFNet Wireless LAN Access Point AP-I002

 

When preparing for installation of the AP-I002, verifying kit contents becomes especially important. 
Please verify all the items in the package are present as listed below: 

1)  One Wireless LAN Access Point (AP-I002); 
2)  One 96-264 VAC input, 5V 2A output adaptor; 
3)  One Quick Start Guide; 
4)  One CD-ROM consists of Network Management Software and User’s Manual; 
5)  One Wall Mounting Guide. 

If you find any missing or wrong item(s), please report to your local authorized reseller, Sales Office 
or our headquarter in Singapore as soon as possible. You are assured of immediate response.   

Before you install the RFNet AP-I002, please write down the following AP-I002 information:  

•  Serial Number 

•  MAC address 

This information is printed on the back housing of the access point as shown below.  

You can mount the AP-I002 on a vertical surface like a wall or place the unit on a flat surface such 
as a table or cabinet. 

Prior to mounting it to a fixed location, consider performing a site survey to determine optimal 
performance and safe location to install your AP-I002 unit(s). See also “Installation Requirements” 
and “Best Place for the AP-I002” on Page10 and Page 11. 

Confirm there is an external antenna attached to the AP-I002 before you proceed to next step. 
(See Figure 2-2). 

9