RFNet Technologies Pte Ltd 000002 用户手册

Wireless

This page lets you configure the Wireless settings.
There are 3 sections: Radio, Security, Advanced.

Radio Settings

SSID: Service Set Identifier. It is a sequence of characters that uniquely names a Wireless LAN.
This name allows PCs to connect to the correct Wireless Access Point when multiple Access
Points (or Wireless Routers) operate in the same location.
Channel: The radio channel number.
Hide SSID: When this is ticked, the router will not broadcast the SSID. Unwelcome PCs will not
be able to scan for the SSID of this Router, and they can only associate if they know exactly what
is the SSID.
Turbo Mode: When this mode is enabled, the Router would communicate with the CardBus at
108Mbps instead of 54Mbps. Turbo mode MUST also be enabled on the CardBus.

Take note of the effects of the following combinations.

Router

CardBus

Connection Speed

Non-turbo

11b

11Mbps

Non-turbo

11g

54Mbps

Non-turbo

Turbo

No connection!

Turbo

11b

11Mbps

Turbo

11g

54Mbps

Turbo

108Mbps

Router

802.11b Card

Connection Speed

Non-turbo

11b

11Mbps

Turbo

11b

No connection!

Turbo setting comes with some limitations. In Turbo mode,

All the devices automatically use Channel 6. Therefore, implementing

multiple cells is not possible with Turbo mode.

The network is more sensitive to interference. Wireless Access Points

operating nearby, regardless of channel, can cause interference to the
Turbo network.

Page