RFNet Technologies Pte Ltd AP1001G 用户手册

 

 

 

 

 

 

9

 

 

best

 

Half ( 50%)

 

100

 

1

 

2346

 

2346

 

Disable  

Enable  

Disable  

Enable   

Auto

 

11 Mbps

 

CTS-only  

RTS-CTS   

Disable  

Enable   

 

: 

You can fix the data rate to different values as 11Mbps or 24Mbps. However it is 

recommended to set the setting to “Best” for AP1001g to determine the best data rate to be use. 
Transmit Power: Sometimes, it is useful to decrease the coverage range of each AP1001g, so 
that more AP1001g can be located together without interference to one another. The default 
transmission power is 100%. 
Beacon Interval

:

 Choose between 20 to 1000.Low Beacon Interval will make the association and 

roaming process very responsive. However, throughput will decrease, so it is necessary to strike 
a balance. Typical Beacon Interval is set to 100ms. 

 

Data Beacon Rate (DTIM): Choose between 1 to 16384.This is always a multiple of the beacon 
interval. It determines how often the beacon contains a delivery traffic indication message (DTIM). 
The DTIM tells power-save client devices that a packet is waiting for them. 
Fragment Length

: 

Specifies the fragment length. Enter a value between 256 and 2346. 

RTS/CTS Threshold: Enter a value between 256 and 2346 
Short Preamble

: 

Enable to use Short Preamble in the Wireless LAN packet headers. Most 

manufacturers implement long preambles. Even if there is a mismatch between AP1001g and the 
client, they can still connect well and the mismatch may not be noticeable to most users. Do not 
change this setting without seeking advice. 
Allow 2.4GHz 54Mbps Stations Only

: 

Use this radio button to enable or disable the association 

of 2.4 Ghz 54 Mbps STA only. 
Protection Mode: Select None, Always or Auto 
Protection Rate: Select 1Mbps, 2Mbps, 5.5Mbps or 11Mbps