RFNet Technologies Pte Ltd AP1001G 用户手册

 

 

 

 

 

 

5

 

 
AP1001g can be configure using a web server.  
 

1.  Connect the network as shown previously. 

 
 
 
 

 

 

If you are accessing the web server via Ethernet cable, check that the 
upper LED lights up on AP1001g. 

 

If your PC is wireless, check the PC’s card utility to make sure that the 
signal strength is good and that the bottom LED lights up on AP1001g. 

 

 

2.  Open a Web browser (Internet Explorer, Netscape etc.). 
3.  Type AP1001g LAN IP (192.168.1.20) address into the browser’s Address field. The 

default LAN IP address of AP1001g is 192.168.1.20. 

 
 

 

 
 
 
 

4.  Enter username and password. There are two types of users, admin user and super user. 

The default username and password for admin user is admin/admin and the default 
username and password for super user is super/super. Only super user will be able to 
carry out firmware upgrade. 

 
In every AP1001g Web Configuration page, the left panel is the navigation menu containing the 
main sections. The right-side frame is where the detailed configuration is done. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Configuration 
panel 

Navigation 
panel