RFNet Technologies Pte Ltd AP2001G 用户手册
IP Address Setting
This page allows you to change the IP address, Subnet Mask and Gateway of AP-2001g. The
default IP address is 10.0.0.2.
default IP address is 10.0.0.2.
Wireless Setup
Basic Setting
This page allows you to change the basic settings of the wireless configuration.
Operation Mode: AP-2001g can be used as an Access Point or as a Wireless Client. The default
setting is Client
WDS: Wireless Distribution System. Enable WDS allows more than one user to connect to
AP-2001g. Disable WDS allows only one user to connect to AP-2001g. The default setting is
WDS disable.
SSID: Service Set Identifier. It is a sequence of characters that uniquely names a Wireless LAN.
This name allows PCs to connect to the correct Wireless Access Point when multiple Access
Points operate in the same location. The default SSID is Teroaka.
Wireless Mode: To choose to operate the AP or Client in 802.11b or 802.11g. Both operate in
the frequency of 2.4GHz but 802.11g has a faster data rate of 54Mbps as compared to the
11Mbps of 802.11b.
setting is Client
WDS: Wireless Distribution System. Enable WDS allows more than one user to connect to
AP-2001g. Disable WDS allows only one user to connect to AP-2001g. The default setting is
WDS disable.
SSID: Service Set Identifier. It is a sequence of characters that uniquely names a Wireless LAN.
This name allows PCs to connect to the correct Wireless Access Point when multiple Access
Points operate in the same location. The default SSID is Teroaka.
Wireless Mode: To choose to operate the AP or Client in 802.11b or 802.11g. Both operate in
the frequency of 2.4GHz but 802.11g has a faster data rate of 54Mbps as compared to the
11Mbps of 802.11b.