RFNet Technologies Pte Ltd AP2061 用户手册
Pg 24 of 26
System Tools > System Log
This page allows you to configure the AP to dump its status to a System Log Server.
Enable Remote System Log: Enable this feature to allow the AP to constantly
update its status on a System log Server.
System Log Server IP: Enter the IP Address of the System Log Server if you had
enabled Remote Logging.
System Log Server Port: Enter the port number the System Log Server is using.
Enable Local System Log: Enable this feature if you do not have a System log
Server. The events would then be logged locally on the AP.
Log Management when log is full (Stop Logging): When this option is chosen,
the AP will stop logging.
Log Management when log is full (Auto Delete): The maximum number of local
log entry is 200. When all the 200 entries are used up, the AP will overwrite previous
entries with new logs.
Remember to Apply and Reboot for the settings to take effect.
update its status on a System log Server.
System Log Server IP: Enter the IP Address of the System Log Server if you had
enabled Remote Logging.
System Log Server Port: Enter the port number the System Log Server is using.
Enable Local System Log: Enable this feature if you do not have a System log
Server. The events would then be logged locally on the AP.
Log Management when log is full (Stop Logging): When this option is chosen,
the AP will stop logging.
Log Management when log is full (Auto Delete): The maximum number of local
log entry is 200. When all the 200 entries are used up, the AP will overwrite previous
entries with new logs.
Remember to Apply and Reboot for the settings to take effect.