Netgear 06100040 用户手册

Configuration

4-7

Note: The channel number differs depending on the country. The connection speed automatically 
defaults to the highest speed.

You can strengthen the security of your wireless connection by enabling Wired Equivalent Privacy 
(WEP) encryption of the wireless data communications. For more information on 802.11 wireless 
security, see 

.

In addition to the WN511T wireless security features, you should also configure appropriate LAN 
network security features such as requiring a user name and password to access the shared 
resources in your network.

The procedures below identify how to configure the WEP encryption settings of your NETGEAR 
RangeMax Next Wireless PC Card WN511T. 

Print this form, fill in the configuration parameters and put it in a safe place for possible future 
reference. For an existing wireless network, the person who set up the network will be able to 
provide this information.

•

Wireless Network Name (SSID): The Service Set Identification (SSID) identifies the wireless 
local area network. 

Any (First available network) 

is the default WN511T wireless network 

name (SSID). You may customize it using up to 32 alphanumeric characters. Write your 
customized wireless network name (SSID) on the line below. 

 The SSID in the wireless access point is the SSID you configure in the wireless pc card. 

For the access point and wireless nodes to communicate with each other, all must be 
configured with the same SSID.

Wireless network name (SSID): ______________________________ 

•

WEP Security Encryption key: The default WEP encryption key number is 1, and the default 
key size is 64 bits.

Note: The key number as well as the key value used by all wireless nodes must be the same. If 
they are different, you will not be able to connect.

WEP Encryption Key Size, circle one: 64 or 128 bits

WEP Encryption Passphrase, if used: ____________________________