Netgear 06100041 用户手册
NETGEAR RangeMax™ NEXT Wireless PCI Adapter WN311B User Manual
Network Connections and Wireless Security
2-13
v1.0, May 2006
Setting up WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the WN311B Smart Wizard.
a.
Make sure the WN311B software is installed and the WN311B is properly installed in a
PCI slot in your computer.
PCI slot in your computer.
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a.
In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c.
In the Security section, select WPA-PSK [TKIP] and enter the passphrase.
The passphrase can be a word or group of printable characters. For more information on
WPA security, see the Web link to
WPA security, see the Web link to
3. Save your settings in a Profile.
a.
Click the Save Profile button. All the configuration settings are saved in this profile.
Figure 2-9
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
matches exactly what is configured in the access point.