Netgear 06200043 用户手册

-5

You can check the status bar in the Smart Wizard for the current connection status.

The Computer-to-Computer setting uses Ad Hoc mode. Ad Hoc mode is an 802.11 networking 
framework in which devices or computers communicate directly with each other, without the use 
of an access point. For example, this mode is used when two Windows computers are configured 
with file and print sharing enabled and you want to exchange files directly between them. 

Follow the instructions below to create an Ad Hoc mode profile.

1. Use the 

 icon to open the Smart Wizard. The Settings page opens.

3. Save your settings in a Profile. 

Note: If you cannot connect, see 

. Also, for problems 

with accessing network resources, the Windows Client and File and Print Sharing 
software might not be installed and configured properly on your computers. Please 
refer to 

.

Note: Ad Hoc mode will not work using DHCP settings. Ad Hoc mode requires either 
static IP addresses (such as 

192.168.0.1)

 or the IPX protocol. For instructions on setting 

up static IP addresses on a Windows PC, refer to the PC Networking Tutorial included on 
the NETGEAR CD.

2. Enter the network settings.

a.

Select Computer-to-
Computer (Ad Hoc) for 
the Network Type.

b. Select or enter the 

Network Name (SSID) 
for the Ad Hoc network.

c.

In the Profile box, type 
the name of the profile.

d. Click Apply.