Netgear 09100105 用户手册

Restricting Access From Your Network

3-9

b. Enter your password for the e-mail server in the Password field.

4. You can specify that logs are automatically sent by e-mail with these options:

•

Send alert immediately. Select this check box for immediate notification of attempted 
access to a blocked site or service.

•

Send Logs According to this Schedule. Specifies how often to send the logs: Hourly, 
Daily, Weekly, or When Full. 

–

Day. Specifies which day of the week to send the log. Relevant when the log is sent 
weekly or daily.

–

Time. Specifies the time of day to send the log. Relevant when the log is sent daily or 
weekly.

If you select the Weekly, Daily, or Hourly option and the log fills up before the specified 
period, the log is automatically e-mailed to the specified e-mail address. After the log is sent, 
the log is cleared from the router’s memory. If the router cannot e-mail the log file, the log 
buffer might fill up. In this case, the router overwrites the log and discards its contents.

5. Click Apply to save your settings.

So that the log entries are correctly time-stamped and sent at the correct time, be sure to set the 
time as described in the next section.

The WNR2000v2 router uses the Network Time Protocol (NTP) to obtain the current time and 
date from one of several network time servers on the Internet. Localize the time zone so that your 
log entries and other router functions include the correct time stamp.

•

Time Zone. To select your local time zone, use the drop-down list. This setting is used for the 
blocking schedule and for time-stamping log entries.

•

Automatically Adjust for Daylight Savings Time. If your region supports daylight savings 
time, select this check box. The router will automatically adjust the time at the start and end of 
the daylight savings time period.