Netgear 09400125 用户手册
Universal WiFi Internet Adapter WNCE2001 User Manual
2-3
v1.0, April 2010
Setting Up WPA-PSK [TKIP] or WPA2-PSK [AES] Security
To configure WPA-PSK (TKIP) or WPA2-PSK (AES) security:
1. Run the WNCE2001 Smart Wizard.
a. Make sure that the WiFi Internet adapter is fully inserted in a USB port in your computer.
b. Use the
icon to open the Smart Wizard. The Settings tab displays.
2. Configure the security settings.
a. In the Profile field, select the profile, or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
c.
In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the
passphrase.
passphrase.
.
3. Save your settings in a profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
Figure 2-1