Netgear 10400149 用户手册

Using Network Monitoring Tools

6-9

To restore your settings from a saved configuration file, enter the full path to the file on your 
computer, or click Browse to browse to the file. When you have located it, click Restore to send 
the file to the router. The router then reboots automatically.

Under some circumstances (for example, if you move the router to a different network or if you 
have forgotten the password) you might want to erase the configuration and restore the factory 
default settings. After an erase, the router’s username is admin, the password is password, the 
LAN IP address is 192.168.1.1 (or www.routerlogin.net), and the router’s DHCP server is 
enabled.

To erase the configuration, click the Erase button in the Settings Backup screen.

To restore the factory default configuration settings when you do not know the login password or 
IP address, you must use the restore factory settings button on the rear panel of the router (see 

The firmware of the N300R router is stored in flash memory, and can be updated as On Networks 
releases new firmware. You can update your firmware by logging into the router and using one of 
these procedures:

•

Enable the Check for Updated Firmware Upon Log-in check box. Each time you log in to 
the router, it will automatically detect a new version of the firmware and then install it. This 
check box is enabled in the router’s default state. See 

•

Use the Check button in the Router Upgrade screen. Instead of having the router check for 
new firmware every time you log in, you can use Router Upgrade, under Maintenance in the 
main menu. See 

Warning: Do not interrupt the reboot process.