Netgear 10400149 用户手册

7-10

Troubleshooting

•

Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a network time server. Check that your 
Internet access settings are correct. If you have just completed configuring the router, wait at 
least 5 minutes, and check the date and time again.

•

Time is off by one hour. 
Cause: The router does not adjust for daylight savings time. In the E-mail screen, select the 
Automatically Adjust for Daylight Savings Time check box.

If your wireless adapter is unable to connect, check its connection settings.

To check the adapter’s connection settings:

1. open the adapter setup utility to check connections:

•

On Networks Smart Wizard utility. If you installed a On Networks wireless adapter in 
your computer, a Smart Wizard utility program is installed that can provide helpful 
information about your wireless network. You can find this program in your Windows 
Program menu or as an icon in your system tray. Other wireless card manufacturers might 
include a similar program.

•

Windows basic setup utility. If you have no specific wireless card setup program 
installed, you can use the basic setup utility in Windows:

–

Open the Windows Control Panel, and double-click Network Connections.

–

In the LAN section, double-click Wireless Network Connection.

2. Use the adapter’s setup program to scan for available wireless networks, looking for the 

network name (SSID) of On Networks, or your custom SSID if you have changed it. 

3. If your wireless network appears and has good signal strength, configure and test with the 

simplest wireless connection possible.

If your wireless network does not appear, check these conditions:

•

•

Is your router’s SSID broadcast enabled? See 

•

Is your router set to a wireless standard that is not supported by your wireless adapter? Check 
the Mode setting as described in 

.