Netgear 11200165 用户手册
Chapter 4: Managing Your Network
|
45
Mobile Broadband 11n Wireless Router MBR1000
3.
Specify when you want the alerts and logs to be sent:
•
Send alert immediately. Select the corresponding check box if you would like
immediate notification of a significant security event, such as a known attack, port
scan, or attempted access to a blocked site.
scan, or attempted access to a blocked site.
•
Send logs according to this schedule. Specifies how often to send the logs: Hourly,
Daily, Weekly, or When Full.
-
Day for sending log. Specifies which day of the week to send the log. Relevant when
the log is sent weekly.
the log is sent weekly.
-
Time for sending log. Specifies the time of day to send the log. Relevant when the
log is sent daily or weekly.
log is sent daily or weekly.
If the Weekly, Daily, or Hourly option is selected and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is
sent, it is cleared from the router’s memory. If the router cannot e-mail the log file, the log
buffer might fill up. In this case, the router overwrites the log and discards its contents.
period, the log is automatically e-mailed to the specified e-mail address. After the log is
sent, it is cleared from the router’s memory. If the router cannot e-mail the log file, the log
buffer might fill up. In this case, the router overwrites the log and discards its contents.
4.
Click Apply so that your changes take effect.
Running Diagnostic Utilities and Rebooting the
Router
Router
The router has a diagnostics feature. You can use the Diagnostics screen to perform the
following functions from the router:
following functions from the router:
•
Ping an IP address to test connectivity to see if you can reach a remote host. If Ping VPN
is enabled, the ping packet always goes through the VPN if the VPN tunnel is enabled
and working.
is enabled, the ping packet always goes through the VPN if the VPN tunnel is enabled
and working.
•
Perform a DNS lookup to test if an Internet name resolves to an IP address to verify that
the DNS server configuration is working.
•
Display the routing table to identify what other routers the router is communicating with.
•
Reboot the router to enable new network configurations to take effect or to clear problems
with the router’s network connection.