Netgear 11200165 用户手册
60
|
Chapter 5: Advanced
Mobile Broadband 11n Wireless Router MBR1000
2.
Click Add or Edit to display the following screen:
3.
Fill in or change the fields:
•
Route Name. The route name is for identification purposes only.
•
Private. Select this check box if you want to limit access to the LAN only.
The static route will not be reported in RIP.
•
Active. Select this check box to make this route effective.
•
Destination IP Address, and IP Subnet Mask. If the destination is a single host, type
a subnet value of 255.255.255.255.
•
Gateway IP Address. This must be a router on the same LAN segment as the router.
•
Metric. Type a number between 2 and 15. This represents the number of routers
between your network and the destination. Usually, a setting of 2 or 3 works, but if this
is a direct connection, set it to 2.
is a direct connection, set it to 2.
4.
Click Apply to either save your changes. If you added a static route, it is added to the Static
Routes screen.
Routes screen.
Universal Plug and Play (UPnP)
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
1.
Select UPnP on the main menu to display the UPnP screen:
2.
Fill in the settings on the UPnP screen:
•
Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration.
The default setting for UPnP is enabled. If disabled, the router will not allow any