Netgear 11300176 用户手册

WPS Support. Identifies whether the router or access point for this network supports 

WPS (Wi-Fi Protected Setup).

MAC Address. The unique hardware address of the wireless device broadcasting this 

information. Typically, this is a wireless router, gateway, or access point.

Join a Network or Connect to a Different Network

You can use WPS to join a wireless network if your wireless network supports it, or you can 
join a wireless network from this NETGEAR Genie screen.

WPS. Press and hold the WPS button on the side of the adapter for 3 seconds. Then 

within 2 minutes, press the WPS button on your wireless router or gateway. Your settings 
are saved in a profile with –WPS at the end.

NETGEAR Genie. Click your wireless network to select it from the list, and then click 

Connect. If the network is secure, enter its password or network key. 

After the adapter joins the network, it automatically saves the network connection information 
to a Windows profile. Windows profiles can be used by Genie and the Windows utility. The 
next time you launch NETGEAR Genie, it will automatically connect to the network you 
previously joined if there's no change in the network information. 



Press and hold the WPS button on the side of the adapter for 2 seconds. 

Then within 2 minutes, press the WPS button on your wireless router or gateway

The adapter joins the network, which can take a few minutes. Your settings are saved in a 
profile.