Netgear 11300177 用户手册
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
14
|
Chapter 1. Hardware Setup
NETGEAR N300 Wireless Gigabit Router with USB JNR3210 User Manual
d. Review your network settings on the Success page. You may want to print this for
your records.
e. Click Next to apply all settings.
Verify the Cabling
Verify that your router is cabled correctly, is turned on, and is receiving power by checking the
router LEDs. The following figure shows the LEDs.
router LEDs. The following figure shows the LEDs.
Power/Check.
The
Power/Check
LED should
turn solid
green.
The
Power/Check
LED should
turn solid
green.
Wireless. The wireless
LED should be lit.
LED should be lit.
Internet (WAN). The
Internet port LED should
be lit. If it is not, make sure
the Ethernet cable is
securely attached to the
router Internet port and the
modem, and that the
modem is powered on.
Internet port LED should
be lit. If it is not, make sure
the Ethernet cable is
securely attached to the
router Internet port and the
modem, and that the
modem is powered on.
LAN. A LAN LED (1-4)
should be lit for each port
that has a computer cabled
to it (a wired connection).
should be lit for each port
that has a computer cabled
to it (a wired connection).
WPS. The WPS LED
is not lit unless you
pressed the WPS
button on the rear
panel.
is not lit unless you
pressed the WPS
button on the rear
panel.
Figure 8. Check the LEDs