Netgear 11300177 用户手册
Chapter 2. Router Internet Setup
|
25
NETGEAR N300 Wireless Gigabit Router with USB JNR3210 User Manual
2.
Contact your ISP to verify that you have the correct configuration information.
3.
Read
contact NETGEAR Technical Support.
Note:
If you cannot connect to the wireless router, check the Internet
Protocol (TCP/IP) properties in the Network Connections section of
your PC Control Panel. They should be set to obtain both IP and
DNS server addresses automatically.
your PC Control Panel. They should be set to obtain both IP and
DNS server addresses automatically.
Change Password
For security reasons, the router has its own user name and password that default to admin
and password. You can and should change these to a secure user name and password that
are easy to remember. The ideal password contains no dictionary words from any language
and is a mixture of upper case and lower case letters, numbers, and symbols. It can be up to
30 characters.
and password. You can and should change these to a secure user name and password that
are easy to remember. The ideal password contains no dictionary words from any language
and is a mixture of upper case and lower case letters, numbers, and symbols. It can be up to
30 characters.
Note:
The router user name and password are not the same as the user
name and password for logging in to your Internet connection. See
1.
Select Maintenance > Set Password to display the following screen:.
2.
Enter the old password.
3.
Enter the new password twice.
4.
Click Apply to save your changes.
After changing the password, you are required to log in again to continue the
configuration. If you have backed up the router settings previously, you should do a new
backup so that the saved settings file includes the new password. See
configuration. If you have backed up the router settings previously, you should do a new
backup so that the saved settings file includes the new password. See