Netgear 12300211 用户手册

下载
页码 166
VPN Configuration
148
N300 Wireless ADSL2+ Modem Router DGN2200v4
Modem Router with FQDN to Gateway B
This section is a case study on how to configure a VPN tunnel from a NETGEAR modem 
router to a gateway using a fully qualified domain name (FQDN) to resolve the public address 
of one or both routers. This case study follows the VPN Consortium interoperability profile 
guidelines (found at 
). 
Configuration Profile
The configuration in this section follows the addressing and configuration mechanics defined 
by the VPN Consortium. Gather the necessary information before you begin configuration. 
Verify that the firmware is up to date, and that you have all the addresses and parameters to 
be set on both sides. Check that there are no firewall restrictions.
Gateway A
WAN IP
Internet
10.506.0/24
(DGN2200)
LAN IP
10.5.6.1
example.org
WAN IP
example2.org
Gateway B
LAN IP
172.23.9.1
172.23.9.0/24
(FQDN)
(FQDN)
Figure 17. VPNC Example, Network Interface Addressing
VPN Consortium Scenario
Scenario 1
Type of VPN 
LAN-to-LAN or gateway-to-gateway (not PC/client-to-gateway)
Security scheme:
IKE with preshared secret/Key (not certificate based)
IP addressing:
NETGEAR-Gateway A
Fully qualified domain name (FQDN)
NETGEAR-Gateway B
FDQN
Using a Fully Qualified Domain Name (FQDN)
Many ISPs provide connectivity to their customers using dynamic instead of static IP 
addressing. This means that a user’s IP address does not remain constant over time, which 
presents a challenge for gateways attempting to establish VPN connectivity.
A Dynamic DNS (DDNS) service allows a user whose public IP address is dynamically 
assigned to be located by a host or domain name. It provides a central public database where 
information (such as e-mail addresses, host names, and IP addresses) can be stored and