Netgear 12300211 用户手册
NETGEAR genie Advanced Home
44
N300 Wireless ADSL2+ Modem Router DGN2200v4
To change the MTU size:
1.
Select Advanced > Setup > WAN Setup.
2.
In the MTU Size field, enter a value from 64 to 1500.
3.
Click Apply to save the settings.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The modem router is shipped preconfigured to use private IP addresses on the LAN side and
to act as a DHCP server. The modem router’s default LAN IP configuration is:
to act as a DHCP server. The modem router’s default LAN IP configuration is:
•
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings in the LAN Setup screen.
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings in the LAN Setup screen.
To change the LAN settings:
Note:
If you change the LAN IP address of the modem router while
connected through the browser, you will be disconnected. You will
have to open a new connection to the new IP address and log in
again.
have to open a new connection to the new IP address and log in
again.
1.
Select Advanced > Setup > LAN Setup to display the following screen: