Netgear 12300211 用户手册

You can use the Restore Factory Settings button on the back of the modem router (see 

142), or you can click the Erase button in this screen.

Erase sets the user name to admin, the password to password, and the LAN IP address to 
192.168.1.1, and enables the modem router’s DHCP.

Set Password

This feature let you change the default password that is used to log in to the modem router 
with the user name admin. 

This is not the same as changing the password for wireless access. The label on the bottom 
of your modem router shows your unique wireless network name (SSID) and password for 
wireless access (see 

8).



Select Advanced > Administration > Set Password to display the following screen:

On the Set Password screen, type the old password, and type the new password twice.

If you want to be able to recover the password, select the Enable Password Recovery 

check box.

Click Apply so that your changes take effect.

Password Recovery

NETGEAR recommends that you enable password recovery if you change the password for 
the router’s user name of admin. Then you will have an easy way to recover the password if 
it is forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome 
browsers, but not in the Safari browser.



Select the Enable Password Recovery check box.

Select two security questions, and provide answers to them.

Click Apply to save your changes.

When you use your browser to access the router, the login window displays. If password 
recovery is enabled, when you click Cancel, the password recovery process starts. You can 
then enter the saved answers to the security questions to recover the password.