Netgear 13200235 用户手册

Set up a Virtual Private Network (VPN)

109

Note:

This pre-shared key is unique to the site-to-site VPN configuration. If you set up a

client-to-gateway VPN tunnel with this gateway, you must use a different pre-shared key
for the site-to-site VPN.

4. In the Site-to-Site Configuration Details section, click the Add button.

5. In the Site Name field, type a meaningful name that is easy to understand.

6. In the WAN IP field, enter the remote gateway’s WAN IP address.

7. In the Remote Site IP address and Subnet field, enter these settings from the remote

gateway.

Note:

Each gateway must have a unique non-overlapping IP address range.

8. Click the Save button.

9. For the second gateway, repeat Steps 1–8 of this procedure.

Enable the Site-to-Site VPN

Enabling the VPN activates the VPN server feature on the gateway.

To enable the VPN:

1. On the first gateway, select Settings > General > VPN.

2. Select the VPN Status Enable radio button.

3. Click the Apply button. The VPN connection is activated.

4. On the second gateway, select Settings > General > VPN.

5. Select the VPN Status Enable radio button.

6. Click the Apply button. The VPN connection is activated.

The IPSec VPN tunnel is established between the two gateways. The LAN-side resources from
one gateway can access the other through this tunnel.

To disable the VPN:

1. On a computer or wireless device that is connected to your gateway, launch a Web

browser.

2. In the address or URL field of your browser, type http://myrouter.

3. When prompted to log in, enter admin for the user name and type the password. (The

default password is password.)

4. Click Settings > General > VPN.