Netgear 13200235 用户手册

Frequently Asked Questions 

113 

 

If you forgot the administrator password and you did not enable password, you will need to 
contact Sprint Customer Support for assistance with resetting the software to default settings. 
(See 

Resetting to Factory Default Settings

.) 

No. The connection to the network goes dormant after a period of inactivity, but the connection 
can be re-established faster than having to reconnect. Billing occurs only when data is passed 
across the network. 

Find answers to common questions about GPS. 

GPS stands for Global Positioning System, which is a system that uses a series of 24 
geosynchronous satellites to provide location data. 

GPS satellites transmit signals to equipment on the ground. GPS receivers passively receive 
satellite signals, but do not transmit. 

GPS works wherever you have line-of-sight access to the GPS satellites. 

By default, GPS is disabled. To enable GPS, see 

Enabling / Disabling GPS

. 

Weather conditions or tall nearby buildings may affect your ability to get a clear view of the 
satellites and thus to acquire a GPS fix. 

GPS NMEA data is streamed over Wi-Fi or over a tethered USB connection using a virtual COM 
port. 

To stream NMEA data for a third party GPS application: 

1.  Set GPS Mode to Continuous. (See 

Setting the GPS Mode

.) 

2.  Determine the COM port number that your NETGEAR device (that is, your NETGEAR 

6100D) is using. 
In the following example for Windows, the Device Manager shows that COM 16 is used.