Netgear 13300241 用户手册

In both of the preceding examples, your computer initiates an application session with a 

server computer on the Internet. However, you need to allow a client computer on the Internet 

to initiate a connection to a server computer on your network. Normally, your modem router 

ignores any inbound traffic that is not a response to your own outbound traffic. You can 

configure exceptions to this default rule by using the port forwarding feature. 

A typical application of port forwarding can be shown by reversing the client-server 

relationship from the previous web server example. In this case, a browser on a remote 

computer accesses a web server running on a computer in your local network. Using port 

forwarding, you can tell the modem router, “When you receive incoming traffic on port 80 (the 

standard port number for a web server process), forward it to the local computer at 

192.168.0.123.” The following sequence shows the effects of the port forwarding rule you 

have defined:

The user of a remote computer opens a browser and requests a web page from 

www.example.com, which resolves to the public IP address of your modem router.  The 

remote computer composes a web page request message with the following destination 

information: 

. The IP address of www.example.com, which is the address of your 

modem router.

. 80, which is the standard port number for a web server 

process.
The remote computer then sends this request message through the Internet to your 

modem router.

Your modem router receives the request message and looks in its rules table for any rules 

covering the disposition of incoming port 80 traf fic. Your port forwarding rule specifies that 

incoming port 80 traffic is forwarded to local IP address 192.168.0.123.  Therefore, your 

modem router modifies the destination information in the request message:
The destination address is replaced with 192.168.0.123.
Your modem router then sends this request message to your local network.

Your web server at 192.168.0.123 receives the request and composes a return message 

with the requested web page data.  Your web server then sends this reply message to your 

modem router.

Your modem router performs Network Address Translation (NAT) on the source IP address, 

and sends this request message through the Internet to the remote computer , which 

displays the web page from www .example.com.

To configure port forwarding, you need to know which inbound ports the application needs. 

Usually you can determine this information by contacting the publisher of the application or 

the relevant user groups and newsgroups.