Netgear 13300241 用户手册

information is not visible in the Network Control Panel of your computer. Verify that the IP 

address of the modem router is listed as the default gateway. 

Check that the network address of your computer (the portion of the IP address specified 

by the netmask) is different from the network address of the remote device.

Check that your Internet LED is on.

If your ISP assigned a host name to your computer, enter that host name as the account 

name in the Basic Settings screen.

The range of your wireless connection can vary based on the physical placement of the 

modem router. The latency, data throughput performance, and notebook power consumption 

of wireless adapters also vary depending on your configuration choices.
For best results, place your modem router according to the following guidelines:

Near the center of the area in which your computers operate.

In an elevated location such as a high shelf where the wirelessly connected 

computers have line-of-sight access (even if through walls).

Away from sources of interference, such as computers, microwave ovens, and 

2.4-GHz cordless phones.

Away from large metal surfaces.

To reduce interference when using more than one access point, NETGEAR 

recommends using 5 channel spacing between adjacent access points (for example, 

use Channels 1 and 6, or 6 and 11).

The time that it takes to establish a wireless connection can vary depending on both your 

security settings and the modem router location. WEP connections can take slightly longer to 

establish. Also, WEP encryption can consume more battery power on a notebook computer.