Netgear 14300289 用户手册

You can set up your WiFi bridge/extender with NETGEAR genie automatically, or you can 
use the genie menus and screens to set up your WiFi bridge/extender manually.

If you set up your computer to use a static IP address, you must change the settings so that it 
uses Dynamic Host Configuration Protocol (DHCP). 

Make sure that the wireless device or computer that you are using supports WPA or WPA2 
wireless security, which is the wireless security that the WiFi bridge/extender supports. For 
information about the WiFi bridge/extender’s preconfigured security settings, see 

22.

Different types of logins have different purposes. It is important that you understand the 
difference so that you know which login to use when.

WiFi bridge/extender login. The user name admin logs you in to the WiFi 
bridge/extender user interface from NETGEAR genie. For more information, see 

16.

Wireless network login. Your WiFi bridge/extender is preset with a unique wireless 
network name (SSID) and password for wireless access. This information is on the 
product label.

NETGEAR genie runs on any device with a web browser. It is the easiest way to set up the 
WiFi bridge/extender because it automates many of the steps and verifies that those steps 
have been successfully completed. It takes about 15

 

minutes to complete. 



Connect the router to a power source.

Make sure that your device is connected with an Ethernet cable to your WiFi 
bridge/extender.

Launch your Internet browser in one of the following ways:

If you are setting up the Internet connection for your WiFi bridge/extender for the first 
time, the browser automatically goes to http://www.routerlogin.net, and the 
NETGEAR genie screen displays.