Netgear 16100334 用户手册

下载
页码 50
Get Started 
13
 AC1200
 WiF
 Range
 Extender
12. 
Make sure that your client device is successfully connected before you click the Continue 
button.
13. 
Click the Continue button.
A message displays confirming that the extender is connected to the new extender WiFi 
network.
14. 
Click the Next button.
The registration screen displays.
15. 
Complete the registration fields and click the Finish button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that 
you must register your extender before you can use NETGEAR telephone support.
The Status screen displays.
16. 
Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router 
network.
17. 
Plug the extender into an electrical outlet.
Wait for the Power LED to light amber and then turn green. 
If the Power LED does not light, press the Power On/Off button.
18. 
Use the Router Link LED to help you choose a spot where the extender-to-router connection 
is optimal.
The extender connects to your existing router’s WiFi network.
Find the Best Location
If the WiFi signal is weak, the first time you join the extender network, the Router Link LED or 
Client Link LED is amber or red. If this happens, adjust the position of the extender:
If the Router Link LED is amber or red, move the extender closer to the router.
If the Client Link LED is amber or red, move the computer or WiFi device closer to the 
extender.