Netgear MP115 用户手册

 

 

 

 

Page 21 of 36   

2BDF0-020017 REV.00 

 

         

>

Press Options 

        To configure the Digital Media Player network settings for wireless Ad Hoc mode and static addressing: 

         

>

Select Network Setup 

         

>

Set Connection to Wireless (Ad Hoc) 

         

>

Select Address 

         

>

Set Configuration to static 

         

>

Set the IP Address to 192.168.0.2 

         

>

Select Netmask to 255.255.255.0 

         

>

Press left arrow to return to Media Adapter options 

         

>

Select Apply Changes to apply the network changes 

        Follow the instructions that came with your wireless network card for setting a static IP address of 

    192.168.0.1 on your PC. 

   

    For security reasons, a wireless network can encrypt the network packets broadcast between devices. This 

    type of encryption is called Wired Equivalent Privacy, or WEP. 

    There are two levels of WEP encryption: 64 and 128 bit. You may have heard the numbers 40 and 104 bit 

    used in conjunction with WEP encryption. These are just two different names for the same encryption 

    method. Because there has been no official standardization of these terms, wireless vendors may use either 

  name. 

    Whether you choose 64 or 128 bit is up to you. You must balance higher security versus slower network 

  performance. 

 

 

   

  • Plug the power cord of the PC, monitor, router, powered speakers, etc. into an active power outlet. Make 

     

 

 

 

sure that the power cords are seated properly in the AC wall outlet. Turn them on. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  This section will help you to choose a proper working environment for the Digital Media Player and its